K-2 GTS
EOL K-2 GTS – The gaming case with lots of features for a small purse!
The K-2 GTS convinces due to its spacious and robust design and has a variety of features. The PSU is mounted at the bottom of the case and is protected by removable dust filters. The serial 120mm fan with red LEDs behind the translucent front panel and the further 120mm fan with red LEDs in the rear of the case ensure an optimal cooling of your components. Additional fans can be mounted in the translucent cap and also on the window side panel.
Another highlight besides the well-thought-out cooling concept of the K-2 GTS is the easy and quick installation of all components. Serial guide screws ensure an easy mounting of the internal 3.5" HDDs. Two separated mounting options of 2.5" HDDs complete the variety of the case. Due to the combination of intelligent cable management and space for extension cards with a length of up to 38cm, the K-2 GTS becomes a space wonder.
The two USB 3.0- and USB 2.0- connectors, as well as the serial 2in1 Card Reader (for MicroSD and SD) on the top of the case offer a fast and easy handling and complete the package.
-
-
Size Form factor ATX, μATX Dimensions (h/w/d) 490 x 210 x 455mm Installation Dimensions Height CPU cooler (max.) 150mm Length graphics card (max.) 380mm Drive Bays 5.25" external 1x 3.5" external 3.5" internal 4x 2.5" internal 2x Front connectors USB 3.0 1x USB 2.0 1x Card Reader Microphone 1x Headphones 1x Power supply ATX-PSU Fan mounting option Front 1x 120mm (red LEDs, Molex-connector, serial) Rear 1x 120mm (red LEDs, Molex-connector, serial) Side 1x 120mm (optional) Top 2x 120mm (optional) Guarantee / Warranty Warranty 24 months Scope of delivery & Features Scope of delivery Case
Retail packaging
Screw set
Features Side panel with window
Removable dust filters in the bottom
Guide srews for internal mounting of 3.5" HDDs
Serial 120mm fan with red LEDs in the front and rear
Translucent front panel and top
Separated SSD mounting option in the bottom
PSU mounting in the bottom
Intelligent cable management
Side panels with thumbscrews
USB 3.0, USB 2.0, Card Reader and Audio plug internal as block connectors
Feet
HD-Audio
Logistical data Shipping Unit 1 Pcs EU palett 24 Pcs Weight net = 3.90kgs
gross = 4.83kgsItem number 88881251 EAN-Code 4260133129535 -
Step 1
At first attach the special screws at the hard drive.
Make sure, that the screws are attached on the correct side. So right when you look at the hard drive from the side without connections.
Step 2
Then slide the hard drive with the special screws into the guide rail in the case.
Step 3
With the side without special screws, the hard drive must lay horizontally on the rail of the opposite side.
Now the hard drive can be pushed smoothly to end of the hdd cage of the case.
Step 4
Finally, screw the hard disk firmly with two "normal" HDD screws from the side, that faces the rear wall of the case.
Done!
-
No special accessories are available for this product.
