IPC/Storage/KVM
-
1U Rackmount Cases
2U Rackmount Cases
3U Rackmount Cases
4U Rackmount Cases
4U 4129L
The IPC 4U 4129L is a 4U case with a depth of 695mm and thus offers sufficient space for high-performance server systems.
4W40 Mining-Rack
The 4W40 is a 4U-rack is designed to mount up to 14 graphics cards and 2 power supply units.
4W2 Mining-Rack
The 4W2 is a 4U-rack with a depth of 635mm and is designed to mount up to 8 graphics cards.
-
1U - 1.5U Storage Cases
2U Storage Cases
3U Storage Cases
4U Storage Cases
ITX Storage Cases
SC-4100
The SC-4100 is a case for Mini-ITX Mainboards with a quadruple Hot-Swap rack for hard drives.
SC-4004
The SC-4004 is a case built for Mini-ITX Mainboards and has a quadruple Hot-Swap-frame for HDDs.
SC-2100
The SC-2100 is an enclosure for Mini-ITX motherboards with a dual 2.5"/ 3.5" Hot-Swap frame in the front, which is located behind a lockable front door.
-
HDD-Draw-Out frames
ST-5255
The ST-5255 is a 5-bay removable rack for 2.5"or 3.5" hard disks that can be mounted in three 5.25" bays. It supports speeds of up to 6 Gb/s and offers the option of a RAID configuration of the installed hard disks (RAID controller required).
ST-5253
The ST-5253 is a 3-bay removable rack for 2.5"or 3.5" hard disks that can be mounted in two 5.25" bays. It supports speeds of up to 6 Gb/s and offers the option of a RAID configuration of the installed hard disks (RAID controller required).
X-3531
The X-3531 is a HDD mobile rack for a maximum of four 2.5" S-ATA I, II, III hard drives or SSDs with standard height for one 5.25" drive bay.
WR-4000
The WR-4000 is a frame-less Mobile Rack for 3.5" S-ATA I, II, III hard drives to mount in 5.25" bays.
RAID Systems
ST-1040 SR
The ST-1040SR is a Sub-RAID for four 2.5" S-ATA I, II, III hard drives up to 12.5mm height.
-
-
SM-1688
The PDU (Power Distribution Unit) SM-1688 is a switchable power board for 19" server cabinet, which can be operated through web interface and SNMP.
SW-1681
The PDU (Power Distribution Unit) SW-1081 is a switchable power board for 19" server cabinet, which can be operated through web interface and SNMP
Modul M-1681
The PDU Module M-1681 is a module of a system for the 19” server cabinet to monitor the remote outputs.
SW-1081
The PDU (Power Distribution Unit) SW-1081 is a switchable power board for 19" server cabinet, which can be operated through web interface and SNMP.
SW-0816
The PDU (Power Distribution Unit) SW-0861 is a switchable power board, intended for installation in 19" server cabinets, which can be operated over web interface.
ST-1021
The PDU ST-1021 is a switchable power board, which can be operated through web interface and SNMP.
Control C-81
The PDU (Power Distribution Unit) Control C-81 is the base unit of one system to monitor the remote M-1681 through web interface or SNMP. With enclosed mounting kit it can be mounted into a 19" server cabinet.
-
Backplane BP-4724-12G
The BP-4724-12G is an optional 24-way backplane with expander chipset for the 19" storage cases 4U 4724 and 4U 4736 with a transmission speed of up to 12G. The backplane replaces the pre-installed 6G backplane.
2U Telescopic Slides 650mm
Telescopic Slides with variable installation depth of 690 to 1000mm and max. load capacity 30kgs.
26" Telescopic rails
Telescopic rails for mounting of 19" IPC-Cases. Maximum extraction depth 550mm to 650mm, depending on the installation in the rack. Maximum load capacity 30Kgs.
2U Telescopic Slides 455mm
Telescopic Slides with variable installation depth of 500 to 800mm and max. load capacity 30kgs.
1U Telescopic Slides 650mm
Telescopic Slides with variable installation depth of 690 to 1000mm and max. load capacity 30kgs
1U Telescopic Slides 455mm
Telescopic Slides with variable installation depth of 500 to 800mm and max. load capacity 30kgs.
20" Telescopic rails
Telescopic rails for mounting of 19" IPC-Cases. Maximum extraction depth up to 510mm, depending on the installation in the rack. Maximum load capacity 30Kgs.
18" Telescopic rails
Telescopic rails for mounting of 19" IPC-Cases. Maximum extraction depth 350mm to 450mm, depending on the installation in the rack. Maximum load capacity 30Kgs.
Network Cable Tester
Cable Tester for 10Base-T, 10Base-T2, RJ45, RJ11, 258A, TIA568A/568B and Token-Ring-Cable.
